260W P10 full color outdoor led display High Intensity Anti Aging
waterproof
Features:
● RGB deep grey scale processing, rich color and HD image effect.
● Strong cabinet with reinforcing rib, tensile and quakeproof, with
dissipation holes, lifespan more than 10 years.
● Energy saving design, can reduce 25% of consumption, it saves
cost for customer, also friendly to the environment.
● Precision, Fast& flexible installation type, can be used in any
installation conditions.
● High intensity& anti-aging material, protection level as high as
IP65, can resist any bad environment.
● Support dot by dot correction, to make sure the consistency of
color and brightness for one screen.
● High quality material, mature craftsmanship, large-scale
manufacture and reliable quality.
● Professional navigation connector, keep the safety of whole
screen.
Aplication:
Supermarkets, home, office, school, warehouse, shopping malls ,
hospitals ,production line , metro stations etc.
Parameters
| Resolution/mm | 10mm |
| Pixel configuration | 1R1G1B |
| Pixel density/pixels/m² | 10000/m² |
| Module resolution | 32*16 |
| Module size/mm | 320*160 |
| View distance | 9-400m |
| White balance brightness | >8000cd/㎡ |
| Color temperature | 6500K-9500K |
| Horizontal view angle | 120(degrees) |
| Vertical view angle | 60(degrees) |
| Signal Process bit | 10 or 16bit |
| Grey process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 |
| Control distances | CAT6 cable:＜100 m; Single mode fiber:＜10 km |
| Driving mode | Constant driving current |
| Scanning mode | 1/4 scan |
| Frame rate | 60Hz |
| Refresh frequency | >2880Hz |
| Control mode | Computer synchronous |
| Brightness adjusted range | Manual, automatic operation, stepless continuous adjusted 255 steps. No grey loss |
| Out of control point | <1/10000 |
| Working hours | ≥72hours |
| Mean Time Between Failure | >5000hours |
| Life time | 100000hours |
| Life-all-white(brightness halving) | 50000hours |
| Environment temperature range | Operating temperature range: -20-45℃ |
| Maximum power:/㎡ | <900W |
| Average power:/㎡ | <350W |
| Self-check technology | LED spot self-check, communications check, power check, temperature monitor(need customization) |
| Remote monitoring | Remote supervision and control, record potential fault, send out warning signs to the operators.(need customization) |
| Software environment | Windows (2007/XP/Vista/7/8/10) |
| Luminous point width between centres | Deviation<3% |
| Brightness uniformity | <10% |
| Color uniformity(chromaticity coordinate) | ±0.003 |
| Power supply request | AC85-264V(50Hz-60Hz) |
| Contrast | (1000:1) |
| System protection | Moisture-proof, dust-proof,high temperature
protection,anti-corrosion,anti-burning,anti-static,anti-vibration |
| Humidity(working) | working:10-95% |
| Humidity(storing) | storing:10-95% |
Installation Procedure
Our serrvices
1. Service before sales
On-site inspect
Professional design
Solution confirmation
Training before operation
Software use
Safe operation
Equipments maintenance
Installation debugging
Installation guidance
On-site debugging
Delivery Confirmation
2. After sale service
Quick response
Prompt question resolving
Service tracing
3. Service concept:
Timeliness, considerateness, integrity, satisfaction service.
We are always insisting on our service concept, and proud of the
trust and reputation from our clients.
4. Service Mission
Answer any question; Deal with all the complaint; Prompt customer
service
We had developed our service organization by responding to and
meeting the diverse and demanding needs of customers by service
mission. We had become a cost-effective, highly skilled service
organization.
5. Service Goal:
What you have thought about is what we need to do well; We must and
will do our best to fulfill our promise. We always bear this
service goal in mind. We can't boast the best, yet we will do our
best to free customers from worries. When you get problems, we had
already put forward solutions before you.
